- Power off the inReach.
- Press and hold the X, DOWN, and Power buttons simultaneously
- The device will power on into Firmware Update Mode.
- Press and release the SOS button and you will see the LED flash Green and Red.
Note: Verify the device is in Firmware Update mode as shown in the image above. - Power off the inReach by holding the Power Button
- Once powered off, power on the inReach and your device is now reset.
Master Reset - In Reach Explorer+ Print
Modified on: Fri, 10 Jul, 2020 at 12:05 PM
Did you find it helpful? Yes No
Send feedbackSorry we couldn't be helpful. Help us improve this article with your feedback.