There are a few instances in which it is necessary to perform a full reset on a Montana 700 series, including the following:

  • Not receiving a satellite signal     
  • Restoring the factory default settings     
  • Not functioning properly

The information and steps below will walk you through backing up your data and resetting.

Before Resetting

Performing a full reset can cause user data loss. User data is waypoints, routes, tracks, activities and geocaches.

It is recommended to back up important data with BaseCamp before resetting. 


Note: The Montana 700i and 750i back up data to your Garmin Explore Website account via the Garmin Explore App. You can still back up data with BaseCamp though.



Performing a Full Reset

  • Power off the Montana     
  • Press and hold Power until the LED becomes red, then release     
  • Double-tap Power to start the reset 
  • The screen will indicate it is resetting and display the progress, then shut off       
  • Power the Montana back on normally     
  • Select your language  
  • The Montana 700i and 750i will display the option to Activate or Skip, select Skip. You will then need to re-pair and sync with the Explore app    

You can now set up the Montana as per our Recommended Settings guide which can be found in the On Line Resource, Module 1 Unit 6


During the Master Reset you will lose the 'Hike NP' profile. The On Line Resource for the Oregon 700, Module 2 Unit 3 shows you how to do that.