How do I perform a Master Reset on my Garmin Oregon 700 Series? : Shepherds Walks and GPS Training

There are a few instances in which it will be necessary to perform a master reset on the Oregon 700 series, including the following:

Performing a master reset can cause data loss. To back up user data* utilize the FAQ “How do I back up user data from my outdoor GPS with a USB interface?". If removing user data is desired to eliminate corrupt data or free up additional space, reference the FAQ “Why does my Garmin outdoor or fitness GPS still show my GPS data after a master reset?”.

To perform the master reset:

If needed, power the device off
Press and hold User key (Button below the power key)
Press and hold Power key (while continuing to hold User key)
When device powers on, release Power key
When the message Do you really want to erase all user data? appears, release User key
Touch 'Erase' (You may need to touch Erase 2 or 3 times for the re-boot to start)
The Device will re-boot and then prompt you to select Language required

*User data consists of waypoints, routes, tracks, and geocaches

The Oregon is now reset. It may be necessary to leave the device outside with a clear view of the sky for 20 minutes to acquire satellite data.

You will need to now work through our recommended setting guide re-entering all of our recommended settings into your GPS Device from the Setup Menu. This can be found in the On Line Resource that you have access to for 1 year for free if you purchased your GPS device from GPS training.
Online resource Access here

Once logged into the Online Resource Goto Courses - Garmin Units
Oregon 700 & 750 - Module 1 Unit 2 has our recommneded settings PDF
We have many more tips and training videos to get you going with your Garmin Handheld GPS device and Garmin's Basecamp planning software on our Online Training Resource - More info here
Buy and learn from the experts - GPS Training

Shepherds Walks and GPS Training